| Fabric Care | - Keep it Flat: Always ensure the blanket is smoothed out and securely tied down. Avoid sitting or jumping on the bed in areas where the internal wiring is located, as sharp pressure can damage the heating circuits, Avoid Moisture: Never use the blanket if it is damp or wet. If a spill occurs, unplug the blanket immediately and allow it to air dry completely before reconnecting., Spot Clean Only: Use a damp cloth or sponge with a mild, neutral detergent to clean any soiled areas., Detach Controllers: Always ensure the controllers are unplugged and removed from the blanket before any cleaning attempt., No Harsh Chemicals: Do not use bleach, dry-cleaning fluids, or strong solvents, as these can degrade the insulation of the heating wires., Air Dry: If the blanket gets damp during spot cleaning, lay it flat on a clothesline or drying rack. Never turn the blanket on to "dry itself," as this can lead to permanent damage or fire risk.
|
| Safety Features | - Overheat Protection (Thermal Cut-off), Double-Insulated Wiring, Dual-Circuit Independence, Secure Tie-Down Design, Safety Controllers
|
| Instructions | - Placement: Spread the blanket flat directly onto your mattress. Ensure the connection points for the controllers are at the head of the bed., Securing: Use the attached tie-down straps to secure the blanket firmly to each corner of the mattress. It must be pulled taut and remain flat—never use the blanket if it is folded, creased, or bunched, as this can cause overheating., Covering: Place your fitted sheet directly over the electric blanket. This is an underblanket and should never be used on top of a person like a traditional throw., Ensure the handheld controllers are firmly plugged into the blanket sockets before connecting the main plug to the wall outlet, Keep the controllers and power cords outside of the bedding (do not tuck them under the mattress or pillows) to prevent them from overheating
|