Nemtek Dual Action Tension Sensor DATS3 UV stabilised glass filled nylon/ XL Galvanised Fence Post  (15 cm)

PRODUCT INFORMATION The patented Nemtek Dual Action Tension Sensor DATS3 can detect a change of tension in the fence wire and uses the electric fence monitoring circuit to create an alarm condition on the energizer. The Dual Action Tension Sensor increases the likelihood of an intruder being detected as it detects the lifting, pressing or forcing of the fence wires. It is equipped with a dual detection system to ensure that an alarm is triggered and reduces the possibility of tampering. The Dual Action Tension Sensor DATS3 is used with galvanised and aluminium fence wires with a detection range (straight line) of up to 50m. Suitable for the heavier gauge wires used in freestanding fencing. Product Code: TS-DATS3XL FEATURES OF THE DUAL ACTION TENSION SENSOR: Is paired up with the Hybrid Compression Spring CNT3HB or CNT4HB. This is so that the tension in the fence wires can be adequately maintained Detects a change in tension on a fence line Detects an open circuit at its first-stage trigger Detects a dead short at its second-stage trigger Constructed from robust material to suit all wire types up to 2.5mm Easy to install and retrofit onto most existing Nemtek electric fences SPECIFICATIONS OF THE DUAL ACTION TENSION SENSOR: Material: UV stabilized glass filled nylon/XL Galvanized Color: Black IP rating: IP54 Dimensions: 170mm (L) x 60mm (H) x 46mm (D) (including screws) Operating detection range: ~220N – ~650N Operating tension range: ~20N – ~200N Operating environment: -20°C – 80°C @ 100% RH (condensing) Operating voltage: ~750V – 12 000V (pulse duration <10msec) Warranty: 12 months limited Manufacturer’s warranty WHAT’S IN THE BOX: 1 x Nemtek Dual Action Tension Sensor DATS3 Limitations: The images shown are for illustrative purposes only. Actual product may vary slightly.