Phronex Car Headlight Lens Restoration Repair Kit Polishing Cleaner Cleaning Tool Scratch Remover Wax  (10 ml)

Features: - Repair headlights yellowing, oxidation, aging, scratches, etc., restore clear and bright lights and restore clear and bright visual effects for night driving. - save hundreds of dollars compared to replacing the headlight lens; no need to remove the headlight during the repair process. - Come with an Adapter for Power Drill, and quickly implement repairs with less time and effort. - The liquid with unique formula is not easy to fall off and helps prevent ultraviolet radiation and re-oxidation. - Repair severely oxidized and yellowed car headlights to maintain a brand-new appearance. This kit is intended to restore 2 headlights. Restore headlight lenses that have become yellowed, cloudy, or hazy. Easier than replacing an old headlight Three easy steps: sand, polish, and protect. Heavy duty drill based Package Include: 2 x P800 Sanding Discs 2 x P1200 Sanding Discs 2 x P2000 Sanding Discs 1 x Orange Sponge Disc 1 x White Sponge Disc 2 x Bags of Polishing Paste 2 x Bags of Protective Liquid 1 x Masking Tape 1 x M10 Backer Pad 1 x Adapter How to Use: Step 1: Preparation Clean the headlight lens with water and cover the area around the lens with tape to prevent the nearby paint surface from being scratched. Step 2: Sanding (800P 1200P 2000P) Wet the sanding disc and fix it on the backing plate. Use three different sand grains to polish three times, each lasting 2-3 minutes, and wash the headlights with water continuously. Repeat three times to completely eliminate the serious yellowing, fading, and corrosion problems. Notes: The lens should be wet during the whole process; the order of using the grinding wheel: 800P 1200P 2000P. Failure to do so will result in failure to restore. Step 3: Polishing Put the orange sponge disc on the backing plate and apply the polishing paste to polish the lens until the gloss returns to its original state. Notes: For better results, please use an electric buffer or polisher. If it is polished by hand, it should be polished clockwise not less than 200 turns. Step 4: Maintenance Use the white sponge tray provided in the kit to apply the protective liquid evenly on the surface of the lens. After applying, leave for 10-15 minutes to allow the liquid to flow evenly, and then immediately dry it under direct sunlight (1 to 2 hours is recommended.) Otherwise, due to its viscosity, the protective liquid will adhere to dust and other dirt, thereby affecting the brightness of the headlights. Notes: When applying the product liquid on the headlights, be sure to avoid sunlight (important). Please clean the headlight lens and make sure the lens is dry before the maintenance procedure is completed. Please do not wash the car within 24 hours after the operation is completed.