ProShield Solvent-based Epoxy Floor Coating Paint  (5 L)

ProShield Floor Epoxy is a high-performance, floor coating designed for use in residential garages, storage areas, and light industrial spaces. Its resilient, high-solids formulation offers superior durability compared to standard water-based paints and common DIY alternatives. This unique polymeric emulsion provides long-term protection against water and chemical absorption, making it easy to clean and maintain, even in demanding environments. Recommended Applications by Layer: • 1 Layer (120-170 microns): Ideal for light-duty use - residential garages, storage areas Good hot-tyre resistance • 2 Layers (240-340 microns): Suited for regular vehicle traffic and fork-lifts • 3 Layers (480-700 microns): Heavy-duty performance for large trucks, busses, and industrial use Key Features: • Water-resistant, chemical and solvents resistant (e.g. fuels, oils, brake-fluid etc.) • Easy to clean - maintains gloss and hardness after repeated washing • Cures at Low temperatures down to 10 C at 85% humidity • Hot-tyre pick-up resistance in 48hrs to 3 days for Light to Heavy traffic respectively (25 deg. C) • Touch-dry in 6-8 hours (depending on temperature) • Designed for 1 to 3 layer roll-on application or up to 2mm pour-and-spread Technical Performance: • Bond Strength: Up to 3 MPa (435 psi) on dry cement surfaces • Typical Test Result: Substrate breakage during adhesion testing Application & Coverage: • Mix Ratio: 2:1 (Resin : Hardener by volume) • Pot Life: 1 hour @ 25 deg. C • Spread Rates: 5 - 7 m per litre (roll-on) • Solvent Dilution for spraying (Optional): Up to 200 ml Xylene per litre for spray or thinner coat applications Cure Schedule @ 25 C: • Touch-dry: 6-8 hours • Foot traffic: 12-16 hours • Light vehicles: 24 hours • Heavy traffic: 3-5 days • Full cure: 7 days Additional Information: • For anti-slip or low-gloss applications, please scan the QR Code on the product label to access the full Application Manual. • For very dense/smooth, damp floors, pair with ProShield Wet-Smart Epoxy Primer to improve bonding and reduce bubble formation on porous floors.