SAM iStar Double Deep Fryer Silver GAS Deep Fryer 12 L Electric Deep Fryer

Double cylinder stainless steel gas fryer Using valve body: low-pressure valve (0.6-1.2), using gas: liquefied petroleum gas, 2. Transportation and storage: This product should be handled with care during transportation to prevent severe vibrations. Packaged products are generally not suitable for long-term outdoor storage. They should be stored in a well ventilated and non corrosive gas warehouse and should not be inverted. When temporary storage is required, rainproof measures should be taken. 3. Installation position and precautions: 1. This product should be placed in a stable place, with a distance of at least 10cm from non combustible materials on both sides, and a distance of at least 20cm from non combustible materials on the back. C. 2. Do not place flammable materials (such as towels, etc.) on the furnace body, otherwise it may cause a fire and lead to a fire accident. 3. Do not use other gases as fuel. 4. If there is a gas leak, the gas valve should be immediately closed, the window glass should be opened, ventilation should be strengthened, and the power supply should not be turned on or off at will. It should be repaired before use. 4. Usage: 1. Before use, the gas pipeline must be checked whether it is connected properly and firmly. 2. Open the gas regulating valve, press the switch in front of the furnace with force, slowly rotate counterclockwise until you hear a "beep" sound, then release it and observe through the small hole whether it has been ignited. Only after confirming that the furnace has been ignited can it be used. If the furnace is used for too long or for the first time, it may not ignite immediately due to air in the intake pipe. Can be pressed Ignite again using the above method until ignited. When the furnace front switch is turned below 90, the firepower will gradually weaken, 4. After use, the switch in front of the furnace should be turned clockwise until a "beep" sound is heard, and the regulating valve for the bottled gas should be closed. 5. When removing oil residue, wait until the oil temperature drops to room temperature before proceeding 5. Cleaning and maintenance: 1. During cleaning and maintenance, the furnace engine should be turned off to prevent accidents. 2. After completing work every day, a warm towel free of corrosive cleaning agents can be used to clean the surface of the furnace body to prevent surface damage. (Note: This furnace uses low-pressure air valves, and the use of medium and high-pressure air valves is strictly prohibited.) What's in the box 1 X Double cylinder stainless steel gas fryer