SONOFF GATE AND GARAGE WIFI SMART SWITCH EWELINK APP Smart Switch  (Green, White)

With this device you can make your electronic gate or garage door smart. When this device is installed, you can open or close your gate/door with either the eWelink app, any voice assistant or home automation hub. The perfect solution for DIY enthusiasts to automate their gate or garage, allowing you to control it from your phone while still using your regular remotes. Works with a wide range of gate/garage motors, including Centurion (D3/5/10, EVO, SMART), DC Blue, Gemini, Digidoor, ET, NICE, Nemtek, and more. If your motor uses a remote, this module will work. The wireless switch supports inching /self-locking mode. You can add the device to the eWeLink APP to remote control connected home appliances or devices. In self-locking mode, you can remotely turn on/off connected devices immediately. When in inching mode, you can turn on the switch for 1s and then auto-turn-off after another 1s. This simulates the press of the remote control button thereby opening or closing your gate or garage motor. Remote control with the EweLink APP for iOS and Android. Supported functions include remote on/off, timing schedules, device sharing, group management. The self-lock/inching mode wireless switch has two power supply specification: 5V. No matter which specification you select, they have the same functions. When the module is switched to self-locking mode, users can turn on/off the connected appliance instantly. There are two wiring way. When the module is switched to inching mode, users can press on/off toggle button to turn on or off connected device. There are two kinds of wiring way. The first wiring option is to connect COM and NO with an appliance. In this case, when users press the setting button or use the APP to switch on, all connected appliance will be switched on for 1s and then automatically turned off. The second wiring method is to connect NC and COM with an appliance. In this way, when users press the setting button or use the APP to switch off, all connected appliance will be turned off for 1s and then automatically turned on. LED Indicator: There are 3 LED indicators. The LED next to the self-lock/inching mode button indicates the working mode (on: self-locking mode, off: inching mode). The LED next to the on/off setting button indicates WIFI status(enter pairing status: long press the setting button until LED blinks fast). And the one below the relay indicates relay on or off status (on: turn on the connected device, off: turn off the connected device). Note: the two models are not hackable. Specification Dimensions:70.5 x 27.4 x 23mm Power supply: 5V/12V DC LEDs: 3 LEDs which indicates working mode, wifi status, relay on/off status respectively. Two input interfaces Board consumption: <1W Standby current: 80mA Max input current: 10A Supports to control different voltage ranges Relay lifespan: more than one million times 100M electrical insulation resistance Electric shock voltage: 1000V Relay maximum pull time: 15ms Relay maximum release time: 5ms Operating temperature: 0ºC-40ºC(32°F-104°F) Operating Humidity 40% ~ 80% RH